Description Video
- Temperature (& Humidity) Chamber
- Thermal Shock Chamber
- Custom Products
- Environmental Test Chambers Network
- Measurement & Evaluation Systems / Semiconductor-related Equipment
- Information
Temperature (& Humidity) Chamber
Platinous J Series
Introducing controllability of N-controller, option and accessories and daily maintenance.
-
Program copy via USB memory
[30sec]
-
Wide-view door (Option)
[17sec]
-
Setting samples
[20sec]
-
Wide-view door (Option) purpose of use
[15sec]
-
Certain door lock
[11sec]
-
Two positions door stop
[11sec]
-
Replacement of wet-bulb wick
[26sec]
-
Level a chamber
[27sec]
-
Install shelf bracket and shelf
[23sec]
-
Cleaning condensing filter
[18sec]
-
Refill the water tank
[18sec]
-
How to use rubber plug
[33sec]
-
Right side cable port (Option)
[15sec]
-
Ethernet (LAN) communication
[1min 14sec]
-
Remote control "power ON/OFF"
[28sec]
-
Remote control "Change setting"
[35sec]
-
N-instrumentation features improved operability and legibility
[12sec]
-
Practical USB memory usage
[27sec]
-
Paperless recorder "Power ON/OFF"
[30sec]
-
Specimen power control terminal for safety current applied test
[12sec]
-
Electrical compartment door switch
[13sec]
-
Testing earth leakage breaker
[16sec]
-
Testing over heat protector and alarm
[40sec]
-
Setting of drain hose
[12sec]
-
Switching water supply [Water tank ⇔ Direct water coupling (option)]
[28sec]
-
Energy saving cover
[13sec]
-
Release door lock from inside of chamber (800L)
[19sec]
-
Remove door holding fixture for transportation
[21sec]
-
EZ connect cable port plug for power supply (Option)
[21sec]
-
Electrochromic viewing window (Option)
[30sec]
Bench-Top Type Temperature (& Humidity) Chamber
Introducing controllability of N-controller, option and accessories and daily maintenance.
-
The Shielded specification SU-642 Bench-top Temperature Chamber
(2min 3sec)
-
High visibility and simple N-controller
[16sec]
-
M stand with water supply and drain tank
[29sec]
-
Preparation before an extended period of non-use
[1min 32sec]
-
How to set wick for wet-bulb sensor (for SH)
[26sec]
-
How to set shelf
[18sec]
-
How to set test samples
[18sec]
-
Refill the water to water tank (for SH)
[25sec]
-
Using USB flash drive
[17sec]
-
Copy a program by USB flash drive
[34sec]
-
Applying voltage to the sample using specimen power supply control terminal
[13sec]
-
Leakage breaker trip and reset (for 100/200V)
[12sec]
-
Testing overheat protector and alarm function
[22sec]
-
Viewing window (Option)
[24sec]
-
Top storage box
[22sec]
-
Cable organizer kit (Option)
[14sec]
-
Hand-in port (Option)
[12sec]
-
Stylus～ Accessory for the P-200 Display ～
[50sec]
AR Chamber Series Rapid-Rate Temperature Cycle Chamber
Introducing products.
Thermal Shock Chamber
Thermal Shock Chamber TSA series
Introducing controllability of N-controller and option.
-
Automatic door (Option)
[38sec]
-
Large Capacity Thermal Shock Chamber
Fixed test area type
Model : TSA-603 (600 liters) [2min 41sec] -
Large capacity Thermal Shock Chamber
Fixed test area type (without moving samples) [2min 35sec] -
Vertical move sliding door
[24sec]
-
Thermal Shock Chamber
(Commercial video) [15sec] -
Cable port
[16sec]
-
Air flow and test sample setting
[25sec]
-
Position of temperature sensor
[17sec]
-
Leakage breaker trip and reset (for 200V)
[17sec]
-
High visibility and simple N-controller
[13sec]
Thermal Shock Chamber TSD
These videos introduce "specimen temperature trigger" function and other options.
-
Traveling test area
[37sec]
-
Specimen Temperature Trigger (STT)* Monitor specimen temperature for precise testing
[1min 32sec]
-
Casters (Option)
[16sec]
-
How to open/close doors
[44sec]
-
Direction of air flow
[26sec]
-
How to use the cable port
(Wiring a thermocouple) [1min 49sec] -
Position of temperature sensors
[20sec]
-
User friendly N-controller
[35sec]
-
Setting baskets and brackets
[43sec]
-
Auxiliary LN₂ cooling injector (Option)
[35sec]
Thermal Shock Chamber TSB
Introducing the function.
Custom Products
These videos introduce some examples of custom products.
-
ALL WEATHER SIMULATION CHAMBER
(7min 8sec)
-
Walk-In Chamber Setup
(7min 25sec)
-
Walk-In Chamber～ Time-Lapse Movie ～
[30sec]
-
RF Anechoic Box Type Low Temperature Chamber “PUAN-4”
(2min 43sec)
-
Large capacity Thermal Shock Chamber
Fixed test area type (without moving samples) [2min 35sec] -
Thermal Shock Chamber (Slider Type)
[1min 11sec]
-
Cross-Slide Door
[1min 26sec]
-
Automatic Vertical Sliding Door～ Vibration chamber
with solar simulator ～ [1min 15sec] -
Test chamber for Climatic～ Salt / Mud Test ～
[1min 28sec]
-
Automatic Vertical Sliding Door～ An example of chamber
customization ～ [1min 34sec] -
Walk-in Type Temperature (& Humidity) Chamber Expansion of low temperature and low humidity control range
[1min 41sec]
-
VOC Emission Test Chamber～ HASEKO Corporation ～
[2min 43sec]
-
Thermal Environment Test Room～ HASEKO Corporation ～
[2min 38sec]
-
Altitude Temperature & Humidity Chamber～ Saitama Industrial Technology Center (SAITEC) ～
[2min 34sec]
-
Weather Simulation Chamber(Temperature / Humidity / Rain / Snow / Sunlight)～ Saitama Industrial Technology Center (SAITEC) ～
[3min 57sec]
-
Weather Simulation ChamberWalk-in type temperature and humidity chamber with insolation device for full-scale vehicle testing～ Central Automotive Products Ltd.,Nakanoshima R&D Center ～
[3min 26sec]
-
Snowfall Test Device～ TOKYU CONSTRUCTION CO., LTD. Institute of Technology ～
[4min 14sec]
-
ESPEC Custom Products～ Examples of our custom product manufacturing ～
[14min 15sec]
-
Drive-in Chamber
Equipped with an inspection machine for parking sensor's detection
[3min 37sec]
Click here for additional video introducing detailed equipments
[7min 15sec]
-
Altitude Training Facility～ Nihon University ～
[3min 57sec]
-
Sliding door
[1min 49sec]
Environmental Test Chambers Network
ESPEC Online Series
Introducing network control system up to 100units of test equipment and other function for quick recovery from test malfunction.
Measurement & Evaluation Systems / Semiconductor-related Equipment
Information
Information on ESPEC.
