|
| |
Temperature chamber series
PH(H), STPH, SPH(H), SSPH, GPH(H), IPH(H), PV(H)
Clean Oven series/PV(H)C:When an Alarm Occurs |
| |
| When display shows alarm message, please reset that message as followings. |
| |
|
|
 |
| Procedure |
|
1. |
The display shows detail alarm message as alarm number. |
|
| 2. |
Please followings the procedure in the table of the alarm message. |
|
| 3. |
Please press POWER switch to reset the alarm message. |
|
| 4. |
Please press POWER switch to re-start the operation. |
|
|
| NOTE |
|
• |
It is no necessary to follow procedure(3) and(4), when alarm 1 and 9 occurs. Because those alarm is automatically reset after the cause of alarm is eliminated.
However, AL-9 remain on the display and you need to press any switch expect POWER switch for eliminate this message |
|
| • |
When the some of the option is equipped, some of the alarm message in the next table will appear without malfunction. In that case, please see the instruction manual for more detail information. |
|
|
|
|
